Fence Staining

Serving Central Kentucky with trusted, high-quality fencing since 1975.

AT A GLANCE

Roark Fencing provides professional fence staining across Central Kentucky — restoring faded wood fences and protecting new ones from sun, moisture, and seasonal temperature swings. We offer semi-transparent, solid, oil-based, and water-based stains, matched to your fence's age, condition, and desired look. New fences are typically stained once the wood has dried (4–12 weeks after installation); older or weathered fences get a full cleaning, minor repairs, and professional application to restore color and extend lifespan. A properly stained wood fence can last up to twice as long as an untreated one, and we recommend restaining every 2–3 years for semi-transparent stain or 3–5 years for solid stain. Every job starts with an on-site evaluation and an honest estimate — we'll tell you plainly if your fence doesn't need staining yet. We serve Georgetown, Lexington, Frankfort, Versailles, Nicholasville, Winchester, Paris, and surrounding Central Kentucky communities.

Why Fence Staining Matters

Protect the Wood, Preserve the Investment

Wood is a natural material, and Central Kentucky’s sun, moisture, and temperature swings break it down fast without protection. Our staining process restores color, seals out damage, and adds years of life to every fence we touch.

🛡️

UV & Moisture Protection

Premium stains seal out sun, rain, and mold so your fence resists rot, warping, and cracking.

🎨

Enhanced Color & Grain

The right stain brings out your wood’s natural grain with rich, lasting color instead of a flat, faded look.

⏳

Extended Lifespan

A properly stained fence can last up to twice as long as an untreated one.

Types of Stain We Use

We use premium, contractor-grade stains chosen for durability, UV protection, and long-term performance.

✓
Semi-Transparent Stain
Enhances natural wood grain with rich, warm color and strong UV and moisture protection.
✓
Solid Stain
Provides full, uniform color coverage — ideal for older fences needing a refreshed, consistent look.
✓
Oil-Based Stain
Deep penetration for long-lasting protection and excellent water resistance.
✓
Water-Based Stain
Fast drying, low odor, and environmentally friendly.

Semi-Transparent or Solid? Here’s How to Decide

A properly stained wood fence can last up to twice as long as an untreated one, and staining early costs far less than repairing rot or replacing boards later. The right choice usually comes down to how much upkeep you want and the look you’re after.

Choose Semi-Transparent When… Choose Solid When…
You want to see and enhance the wood grain You want full, uniform color coverage
Your fence is newer or in good condition Your fence is older or has uneven coloring
You’re comfortable restaining every 2–3 years You want to go longer between stainings (3–5 years)
You want a natural, warm look You want a clean, solid-color finish

Our Fence Staining Process

01

On-Site Evaluation

We inspect your fence, assess its condition, and provide a clear, honest estimate — no surprises.

02

Cleaning & Preparation

We remove dirt, mildew, and old residue so the stain absorbs evenly across every board.

03

Repairs If Needed

Loose, cracked, or damaged boards are repaired before staining for a clean, uniform finish.

04

Professional Stain Application

We apply stain using professional equipment for smooth, even coverage on every board, rail, and post.

05

Final Inspection

We walk the property with you to confirm the finish meets our standards — and yours.

Our Promise

“We don’t just install fences — we build long-term property value through quality workmanship and disciplined execution.”

Serving Central Kentucky With Pride

Roark Fencing proudly stains and restores wood fences across Georgetown, Lexington, Frankfort, Versailles, Nicholasville, Winchester, Paris, and the surrounding Central Kentucky communities.

How often should I stain my wood fence?
We recommend staining every 2–3 years for semi-transparent stain, or every 3–5 years for solid stain. Sun exposure, weather patterns, and wood type can all affect how often your fence needs attention — we’ll help you set the right maintenance schedule.
We recommend waiting until the wood has properly dried before staining — typically 4 to 12 weeks after installation, depending on the season. Staining too early can trap moisture and prevent the stain from absorbing evenly.
Semi-transparent stain enhances the natural wood grain with a warm, see-through color and strong UV and moisture protection. Solid stain provides full, uniform color coverage and is ideal for older fences that need a refreshed, consistent look.
Signs include wood that looks gray or faded, water that no longer beads on the surface, dry or rough boards, visible mold or mildew, uneven or patchy color, and wood that’s absorbing moisture. Staining early prevents costlier repairs later.
Yes. Every project starts with an on-site evaluation and a clear, honest estimate — no hidden fees. If your fence doesn’t need staining yet, we’ll tell you plainly.
Most residential fence staining projects take 1–2 days, depending on fence size, condition, and the type of stain used. We’ll give you a specific timeline during your on-site evaluation.